![Xp home network file sharing](https://loka.nahovitsyn.com/172.jpg)
- XP HOME NETWORK FILE SHARING HOW TO
- XP HOME NETWORK FILE SHARING INSTALL
- XP HOME NETWORK FILE SHARING PC
The LMB is important because it is what keeps a list of all the shares and what devices have those shares.
XP HOME NETWORK FILE SHARING PC
If you were to turn off the pc that is the current LMB then all the devices start negotiating again to decide who will be the LMB. Next day you turn on PC#2 then PC#1 and PC#2 is the LMB. One day you turn on PC#1 and PC#2 was already running so it is the LMB. If you have two pc on the network either of them can become the master browser mainly depending on who was there first. The master browser will be the device with the highest OS level. When you turn on a device on the network the device announces itself to the LMB or local master browser located within its workgroup only. Workgroups are simply groups of devices to make it easier to manage. The next thing we need to setup is the workgroup. If you disable the firewall and still do not get a connection then make sure the lights are lit on the ethernet ports of the WDTV and the pc.
XP HOME NETWORK FILE SHARING HOW TO
If you don’t see something like above then you have a firewall or something else in the way. There are too many firewall products for me to tell you how to set it so I would disable them for this test. That shows we have a good connection to the box. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),Īpproximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms You should see something like below with less than 2ms times and no loss. In the window that pops up type ping 192.168.1.2 In windows go to start, in the box type CMD In windows that is under local area conneciton / properties / Internet protocol V4 / properties Go to network settings and tell it you want to manually assign IP addresses.
![xp home network file sharing xp home network file sharing](http://omg.wthax.org/network.jpg)
Now you need to set up the network on the pc. Yes this means moving the live and fiddling with the wiring on the pc, but it is a necessary stepĭo not supplement a wireless connection for this part. Connect the Live and pc using the crossover cable.
![xp home network file sharing xp home network file sharing](https://www.windowscentral.com/sites/wpcentral.com/files/styles/large/public/field/image/2016/03/windows-10-homegroup_.jpg)
It will not hurt the pc if you use the wrong cable, it just may not work. If you hold cable ends side by side you will see a different order on crossover cables.Ī normal cable will have all the colors in the same order. A crossover cable is an ethernet cable that has some of the wires swapped on one end. Some of the steps may seem mundane but please do not skip any of them as the process is very important to finding the problem. Start from the basics and work your way up. When troubleshooting you want to take as many variables out of the mix as possible.
XP HOME NETWORK FILE SHARING INSTALL
I know many are having issues with the Live and networking, so I hope this helps.This is without changing any public sharing, media sharing, passwords and homegroups are still on, basically a default install of windows.
![Xp home network file sharing](https://loka.nahovitsyn.com/172.jpg)